Aerospace Materials I — Extra Problems
Test questions and exam-style problems written for this portal, grouped by exam, with every answer explained and every problem solved step by step. They are practice material, not official exercises: the official ones are on the Problems page.
2nd Midterm
Assessment Test II covers Units 4 to 7: phase diagrams, mechanical, electrical, magnetic and thermal properties. It is a test of ten questions (5 points) and two problems: a longer one on phase diagrams (3 points) and a shorter one on mechanical properties (2 points). Practise the questions block by block, work through the problems, or take a timed exam in the Exam simulator.
Test Questions, Blocks B01 to B62
620 questions with four options in 62 blocks of ten, each with its answer and the reason why every wrong option is wrong.
- B01 Components, phases and microconstituents
- B02 Unary diagrams and isomorphous systems
- B03 Isomorphous systems and the Gibbs phase rule
- B04 Gibbs phase rule and tie lines
- B05 Tie line and lever rule
- B06 Coring and the eutectic reaction
- B07 Eutectic systems and the Pb-Sn diagram
- B08 Hypoeutectic and hypereutectic alloys
- B09 Eutectic microconstituents and the solvus
- B10 Precipitation and invariant reactions
- B11 Invariant reactions
- B12 Intermetallic compounds and the Fe-Fe3C diagram
- B13 The Fe-Fe3C diagram
- B14 Steel microstructures and amounts
- B15 Steels, cooling rate, alloying elements and ceramic diagrams
- B16 Mechanical tests, the tension test and engineering stress and strain
- B17 Elastic and plastic deformation at the atomic level
- B18 Hooke's law, Young's modulus and elastic elongation
- B19 Young's modulus, bonding, families of materials and non-linear elasticity
- B20 Poisson's ratio, lateral contraction and the shear modulus
- B21 Elastic constants from contraction, and the compression, impact, bend, shear and torsion tests
- B22 Slip, dislocations and slip systems
- B23 Yield strength, the 0.2 % offset and discontinuous yielding
- B24 Working stress, tensile strength and necking
- B25 What a given load does to a wire, a bar or a rod
- B26 Ductility: percent elongation and percent reduction in area
- B27 Toughness and the modulus of resilience
- B28 True stress and true strain
- B29 The neck, the strengthening principle and strain hardening
- B30 Effects of cold work, solid solution and grain size strengthening
- B31 Solid solution, grain boundaries, precipitation and aircraft aluminium alloys
- B32 Hardness tests and hardness against tensile strength
- B33 Energy bands and classification of materials
- B34 Metallic conduction, drift velocity and mobility
- B35 Conductivity, carriers and resistivity of metals
- B36 Matthiessen's rule, residual resistivity and hardening
- B37 Non-metallic conductors and intrinsic semiconductors
- B38 Intrinsic semiconductors, band gap and temperature
- B39 Extrinsic semiconductors, dopants and carriers
- B40 Dopant levels and extrinsic conductivity with temperature
- B41 Temperature ranges and semiconductor devices
- B42 Dielectrics, ferroelectrics and piezoelectrics
- B43 Magnetic moment, induction, permeability and susceptibility
- B44 Types of magnetism and dipole arrangements
- B45 Magnetic materials, domains and Bloch walls
- B46 Magnetization curve and hysteresis loop
- B47 Soft and hard magnetic materials
- B48 Curie and Néel temperatures and superconductors
- B49 Superconductivity and heat capacity
- B50 Thermal expansion
- B51 Thermal conductivity and expansion
- B52 Thermal stresses and thermal shock
- B53 Metallic and ionic conduction applied
- B54 Intrinsic semiconductors applied
- B55 Extrinsic semiconductors, dopants and carrier data
- B56 Extrinsic conductivity against temperature and devices
- B57 Dielectrics, ferroelectrics and piezoelectrics applied
- B58 Magnetic moments, fields and types of magnetism applied
- B59 Domains, hysteresis and the tables of magnetic materials
- B60 Loop factors, Curie and Néel temperatures and superconductors
- B61 Superconductor applications, heat capacity and thermal expansion
- B62 Thermal conduction, thermocouples, thermal stresses and thermal shock
Exam-Style Problems P01 to P20
20 problems solved step by step: the long phase-diagram problem (3 points) and the short Unit 5 problem (2 points).
- P01 Two eutectics around a congruently melting compound in a hypothetical A-B system
- P02 Alloy composition from the eutectic fraction in an M-N system with an incongruent compound (at%)
- P03 Cooling an X-40 wt% Y alloy through a peritectic, a eutectic and a eutectoid
- P04 Building a G-H diagram with a congruent and an incongruent compound from a table of equilibria
- P05 Cooling of a Pb-50 wt% Sn alloy read from the Pb-Sn diagram
- P06 Building a eutectic diagram from a description and using it
- P07 Composition of an Ag-Cu alloy worked backwards from its micrograph
- P08 Cooling history of a 50 kg casting from a table of tie-line compositions
- P09 Hypoeutectoid steel bar above and below the eutectoid temperature
- P10 Slow cooling of a hypereutectoid tool steel read on the Fe-Fe3C diagram
- P11 Carbon content of an unknown steel worked back from its micrograph
- P12 Three steels compared: microconstituents, hardness and alloying elements
- P13 Titanium alloy tensile test from a load and gauge length table
- P14 Ductility and true fracture stress of an aluminium alloy from the broken specimen
- P15 Resilience and true stress of a steel read from its stress-strain curve
- P16 Rebuilding the raw measurements of a magnesium alloy tensile test from its report
- P17 Nickel alloy tie rod under a tensile load
- P18 Choosing the alloy of a light control rod
- P19 Aluminium alloy specimen loaded beyond yield and unloaded
- P20 Minimum diameter of a titanium hanger rod