Value Creation: Environment and Competitive Advantage

Business objectives and stakeholders, strategic decisions, the generic and specific environment with Porter's five forces, corporate and business strategy, sources of competitive advantage, diversification and the value chain.

📖 Source: Universidad Carlos III de Madrid · Topic 2_ Value creation.pdf (Prof. Carmen Paz-Aparicio), Slides 1-31

Central idea: the objective of the firm moves from the classical maximization of profit to the creation of value, agreed among its stakeholders. To reach it, the firm defines a strategy: it studies the generic and the specific environment (Porter's five forces), decides where to compete (corporate strategy: product, geographical and vertical scope) and how to compete (business strategy: cost or differentiation advantage), and analyses its own activities through Porter's value chain.

The topic is organised in three parts [Slide 2]: business objectives (the traditional concept of profit maximization, and the new objectives that arise from the role of stakeholders), business strategies and their types, and the generic and specific environment.

§ 1 The traditional concept: profit maximization [Slide 3]

Traditionally, the objective of the business is identified with the objective of the entrepreneur, and the Classical Theory states that this objective is profit maximization. The view has four limitations:

§ 2 Management and objectives [Slide 4]

To avoid the conflict of interests between managers and shareholders, their objectives must be aligned. Four mechanisms do so: incentive compensation, the market of enterprises, the labour market and the markets of the factors of production. In the end, managers try to maximize their own interests, always subject to achieving a minimum level of profit that satisfies the shareholders.

§ 3 Stakeholders and organizational theory [Slides 5-6]

Many groups have a stake in the objectives of the firm. Around management stand the shareholders, banks and other financial agents, customers, suppliers, the State, employees and labour unions, and society (corporate social responsibility) [Slide 5].

Shareholders Banks and other financial agents Customers Suppliers State Employees / labour unions Society (CSR) MANAGEMENT
Figure 1. The stakeholders around management: shareholders, banks and other financial agents, customers, suppliers, the State, employees and labour unions, and society.

According to organizational theory, the objectives of the business are the outcome of a negotiation among these stakeholders, limited by two facts: the firm must survive, and not all groups have the same decision-making power. The business objective is therefore the one that satisfies the group with the highest bargaining power, while taking into account the objectives of the other groups and the survival of the enterprise. That objective is to maximize the value of the enterprise: to create value [Slide 6].

§ 4 A unified vision: survival, profit and growth [Slide 7]

The three goals form a single cycle. Current and new products and markets generate sales, and sales generate profits. Part of the profits is retained for future investments and adds directly to total equity; the rest is paid as dividends, which support the capital market valuation of the company and thus the equity attributable to investors, which also feeds total equity. Total equity finances new investments, and these renew the products and markets, closing the cycle.

Products / markets (current and new) Sales Profits Retained profits (for future investments) Dividends Capital market valuation of the company Equity attributable to investors Total equity Investments
Figure 2. Survival, profit and growth as one cycle: products and markets bring sales and profits; profits are retained or paid as dividends; both feed total equity, which finances new investments.

§ 5 Business strategies: levels of decision [Slide 8]

To achieve its objective, the firm defines a strategy: "a plan, method or series of actions designed to achieve a specific goal or effect" (Wordsmyth Dictionary). The strategy unfolds into three levels of decision: strategic, tactic and operative decisions.

Business objective Define a strategy Strategic decisions Tactic decisions Operative decisions
Figure 3. To reach the objective the firm defines a strategy, which unfolds into strategic, tactic and operative decisions.

§ 6 Types of strategic decisions [Slide 9]

Strategic decisions belong to two families:

Strategic decisions Corporate strategy Competitive or business strategy Product scope (diversification) Geographical scope (internationalization) Vertical scope (vertical integration) Cost-leadership strategy Differentiation strategy
Figure 4. Strategic decisions split into corporate strategy (product, geographical and vertical scope) and competitive or business strategy (cost leadership or differentiation).

§ 7 What makes a successful strategy [Slide 10]

A strategy succeeds through effective implementation resting on three pillars: long-term, simple and agreed objectives; a deep understanding of the competitive environment; and an objective appraisal of resources.

Successful strategy EFFECTIVE IMPLEMENTATION Long-term, simple and agreed objectives Deep understanding of the competitive environment Objective appraisal of resources
Figure 5. A successful strategy rests on effective implementation of agreed long-term objectives, a deep understanding of the competitive environment and an objective appraisal of resources.

§ 8 The business environment: generic and specific [Slides 11-12]

The environment of the firm has two layers.

The generic environment affects every firm and is described by four groups of factors [Slide 11]:

FactorsContent
EconomicMacroeconomic variables; business cycle period; type of economic policy; country resources
Political-legalMonetary and fiscal policies; labour market regulation; industry regulation
Socio-culturalValue system; level of education; class structure; income distribution; population distribution; etc.
TechnologicalBasic, key and incipient technologies

The specific environment is the environment of the firm's own industry [Slide 12]. It includes the rivalry within the industry, which depends on concentration, the industry rate of growth and product differentiation; the barriers to entry and to exit; substitutes; and the relationships with customers and with suppliers.

GENERIC ENVIRONMENT Economic factors Macroeconomic variables Business cycle period Type of economic policy Country resources Socio-cultural factors Value system Level of education Class structure Income distribution Population distribution Etc. Political-legal factors Monetary and fiscal policies Labour market regulation Industry regulation Technological factors Basic technologies Key technologies Incipient technologies SPECIFIC ENVIRONMENT Rivalry within the industry concentration, rate of growth, product differentiation Barriers to entry Barriers to exit Substitutes Relationship with customers Relationship with suppliers
Figure 6. The two layers of the business environment: the generic environment (economic, political-legal, socio-cultural and technological factors) around the specific environment of the industry.

§ 9 From environmental analysis to industry analysis [Slide 13]

The analysis moves from the outside in. At the centre is the industry environment, formed by suppliers, competitors and customers. Around it act the national and international economy, technology, government and politics, the natural environment, the demographic structure and the social structure.

THE INDUSTRY ENVIRONMENT Suppliers Competitors Customers The national / international economy Technology Government and politics The natural environment Demographic structure Social structure
Figure 7. The industry environment (suppliers, competitors, customers) inside the wider environment that acts on it.

§ 10 Porter's five competitive forces [Slides 14-15]

The industry is analysed with Porter's five competitive forces (Porter, 1982). At the centre is the rivalry among existing firms; around it act the bargaining power of suppliers, the bargaining power of buyers, the threat of new entrants and the threat of substitutes [Slide 14]. Each force depends on a set of determinants [Slide 15]:

ForceDeterminants
Supplier powerSuppliers' price sensitivity; relative bargaining power
Buyer powerBuyers' price sensitivity; relative bargaining power
Threat of entryCapital requirements; economies of scale; absolute cost advantage; product differentiation; access to distribution channels; legal and regulatory barriers
Substitute competitionBuyers' propensity to substitute; relative prices and performance of substitutes
Industry rivalryConcentration; diversity of competitors; product differentiation; excess capacity and exit barriers; cost conditions
INDUSTRY RIVALRY Rivalry among existing firms Concentration Diversity of competitors Product differentiation Excess capacity and exit barriers Cost conditions SUPPLIER POWER Bargaining power of suppliers: suppliers' price sensitivity, relative bargaining power BUYER POWER Bargaining power of buyers: buyers' price sensitivity, relative bargaining power THREAT OF ENTRY (potential entrants) Capital requirements Economies of scale Absolute cost advantage Product differentiation Access to distribution channels Legal / regulatory barriers SUBSTITUTE COMPETITION (threat of substitutes) Buyers' propensity to substitute Relative prices and performance of substitutes
Figure 8. Porter's five competitive forces (1982) and the determinants of each: supplier power, buyer power, threat of entry, substitute competition and the rivalry among existing firms.

§ 11 The strategic management process [Slide 16]

Strategic management follows five steps: the mission statement, the performance objectives, the development of strategies, the implementation of the strategy, and the evaluation of performance.

§ 12 Corporate strategy and business strategy [Slides 17-18]

The aim is to earn a rate of profit above the competitive level; in other words, to answer the question "how do we make money?". Two sources contribute to it [Slide 17]:

Rate of profit above the competitive level How do we make money? Industry attractiveness Which businesses should we be in? Competitive advantage How should we compete? CORPORATE STRATEGY BUSINESS STRATEGY
Figure 9. A rate of profit above the competitive level comes from two sources: being in attractive industries (corporate strategy) and holding a competitive advantage (business strategy).

Business strategy is concerned with how a firm competes within a particular market. Corporate strategy is concerned with where a firm competes, that is, with the scope of its activities, which has three dimensions: geographical, vertical and product scope [Slide 18].

§ 13 The three dimensions of scope [Slide 19]

Each dimension of scope can be pictured as a choice between one firm and several (Grant, 2002):

In the integrated firm the vertical units (V), product units (P) and country units (G) are linked by an administrative interface; under specialization each unit is a separate firm linked to the others by market interfaces.

Single integrated firm Several specialized firms Vertical scope V1 V2 V3 V1 V2 V3 Product scope P1 P1 P2 P2 P3 P3 Geographical scope G1 G1 G2 G2 G3 G3
Figure 10. The scope of a firm along each dimension: one integrated firm linked by an administrative interface, or several specialized firms linked by market interfaces (after Grant, 2002).

§ 14 Business strategy: sources of competitive advantage [Slide 20]

Competitive advantage comes from two sources: a cost advantage, offering a similar product at a lower cost, or a differentiation advantage, obtaining a price premium from a unique product.

COMPETITIVE ADVANTAGE COST ADVANTAGE Similar product at lower cost DIFFERENTIATION ADVANTAGE Price premium from unique product
Figure 11. The two sources of competitive advantage: cost advantage and differentiation advantage.

§ 15 Drivers of cost advantage [Slides 21-22]

DriverHow it reduces costs
Economies of learningImproved organizational routines
Economies of scaleSpecialization and division of labour
Production techniquesProcess innovation; reengineering of business processes
Product designStandardization of designs and components; design for manufacture
Input costsLocation advantages; ownership of low-cost inputs; non-union labour; bargaining power
Capacity utilizationRatio of fixed to variable costs; speed of capacity adjustment
Residual efficiencyOrganizational slack; motivation and culture; managerial efficiency

§ 16 Differentiation [Slides 23-24]

Differentiation concerns how a firm distinguishes its offerings from those of its competitors, that is, how the firm competes. In Porter's words, it means "providing something unique that is valuable to the buyer beyond simply offering a low price". The key is to create value for the customer [Slide 23].

Differentiation can be [Slide 24]:

Differentiation is not only about the product: it embraces the whole relationship between supplier and customer (total customer responsiveness).

§ 17 Corporate strategy: diversification [Slide 25]

A diversification decision involves two questions: how attractive is the sector to be entered, and can the firm achieve a competitive advantage in it? Firms diversify for three reasons:

§ 18 Types of diversification [Slide 26]

Diversification takes three forms: vertical integration (along the firm's own value chain), horizontal diversification (moving into a new industry) and geographical diversification (opening new markets).

§ 19 Vertical integration [Slide 27]

Vertical integration can be forward or backward.

AdvantagesDisadvantages
Control of inputs and outputsIncreased risk (outsourcing)
Reduction of transaction costsDecreased flexibility
IndependenceLoss of specialization advantages
Better competitive positionIncreased administrative costs
Reduction of information asymmetries

§ 20 Porter's value chain [Slides 28-31]

The term value chain was introduced by Michael Porter (1985). An organization is more than a random collection of resources: it arranges its resources into systems and activities that produce goods customers are willing to pay for, and the management of these activities and of their linkages is what gives it a competitive advantage [Slide 28].

The chain has two layers: support activities that span the whole firm, and primary activities that follow the product from inputs to after-sales. Together they produce the margin [Slide 29].

Support activities Firm infrastructure Human resources Technology development Procurement Inbound logistics Operations Outbound logistics Marketing and sales Service Margin Primary activities
Figure 12. Porter's value chain (1985): four support activities above five primary activities, whose combined result is the margin.

Primary activities [Slide 30]:

ActivityContent
Inbound logisticsRelationships with suppliers and all the activities required to receive, store and disseminate inputs
OperationsAll the activities required to transform inputs into outputs (products and services)
Outbound logisticsAll the activities required to collect, store and distribute the output
Marketing and salesInforming buyers about products and services, inducing them to purchase, and facilitating the purchase
ServiceAll the activities required to keep the product or service working effectively for the buyer after it is sold and delivered

Secondary (support) activities [Slide 31]:

ActivityContent
ProcurementThe acquisition of inputs, or resources, for the firm
Human resource managementRecruiting, hiring, training, developing, compensating and, if necessary, dismissing or laying off personnel
Technological developmentThe equipment, hardware, software, procedures and technical knowledge used to transform inputs into outputs
InfrastructureServes the company's needs and ties its parts together: accounting, legal, finance, planning, public affairs, government relations, quality assurance and general management

Reference: Porter, M. E., Competitive Advantage, The Free Press, New York, 1985, Ch. 1, pp. 11-15.