Topic 3: Solved Problems

Full step-by-step analytical resolutions for the 6 official problem set exercises on Diffusion in Solids and Mass Transport, formatted with rigorous 4-phase pedagogical derivations.

Official UC3M Error Function Reference Table [Session 5 Slide 21]
$z$$\text{erf}(z)$ $z$$\text{erf}(z)$ $z$$\text{erf}(z)$ $z$$\text{erf}(z)$
0.000.00000.250.27630.700.67781.300.9340
0.010.01130.300.32860.750.71121.400.9523
0.020.02260.350.37940.800.74211.500.9661
0.030.03380.400.42840.850.77071.600.9763
0.040.04510.450.47550.900.79691.700.9838
0.050.05640.500.52050.950.82091.800.9891
0.100.11250.550.56331.000.84271.900.9928
0.150.16800.600.60391.100.88022.000.9953
0.200.22270.650.64201.200.9103
Problem 1 Problems T3_Diffusion.pdf #1 Fick's 2nd Law · erf(z)
Click to Collapse ▲

Cementation of Grade 1018 Steel Gear

Original statement · Problems T3_Diffusion.pdf
1. In a steel gear of grade 1018 ($0.18\text{ wt}\%\text{ C}$) a cementation process is carried out at $927^\circ\text{C}$. Calculate the time required in order to increase the $\text{C}$ content up to $0.3\text{ wt}\%$ at $0.6\text{ mm}$ below the surface of the gear. Assume that the $\text{C}$ content in the surface is $1\text{ wt}\%$. Data: $D_{\text{C in } \gamma\text{-Fe}} = 1.28 \times 10^{-11}\text{ m}^2/\text{s}$.
Official Solution: t = 6636 s (1.84 h)
Phase 1 · Hypotheses & Parameters
  • Semi-Infinite Medium: The penetration depth $x = 0.6\text{ mm}$ is small compared with the size of the part, allowing one-dimensional semi-infinite modeling [Session 5 Slide 20].
  • Constant Surface Concentration: The carburizing atmosphere maintains $C(0, t) = C_s = 1.0\text{ wt}\%$ for $t > 0$.
  • Homogeneous Initial State: The AISI 1018 steel core has initial carbon concentration $C(x, 0) = C_0 = 0.18\text{ wt}\%$.
  • Parameters: $C_0 = 0.18\text{ wt}\%$, $C_s = 1.00\text{ wt}\%$, $C_x = 0.30\text{ wt}\%$, $x = 0.6\text{ mm} = 6.0 \times 10^{-4}\text{ m}$, $D = 1.28 \times 10^{-11}\text{ m}^2/\text{s}$ at $T = 927^\circ\text{C}$.
Phase 2 · Formulation & Pedagogical Strategy

In non-steady-state diffusion into a semi-infinite solid with constant surface composition, Fick's Second Law yields [Session 5 Slide 20]:

$$\frac{C_s - C_x}{C_s - C_0} = \text{erf}\left(\frac{x}{2\sqrt{Dt}}\right) = \text{erf}(z)$$

We evaluate the concentration ratio, locate the corresponding argument $z$ in the official error function table via exact linear interpolation, and solve for time $t$:

$$z = \frac{x}{2\sqrt{Dt}} \implies t = \frac{x^2}{4 \cdot z^2 \cdot D}$$
Phase 3 · Step-by-Step Analytical Derivation

1. Concentration Ratio:

$$\frac{C_s - C_x}{C_s - C_0} = \frac{1.00 - 0.30}{1.00 - 0.18} = \frac{0.70}{0.82} \approx 0.8536585 \implies \text{erf}(z) = 0.8536585$$

2. Linear Interpolation in Error Function Table [Slide 21]:

  • For $z_1 = 1.00 \implies \text{erf}(z_1) = 0.8427$
  • For $z_2 = 1.10 \implies \text{erf}(z_2) = 0.8802$
$$\frac{z - 1.00}{1.10 - 1.00} = \frac{0.8536585 - 0.8427}{0.8802 - 0.8427} \implies \frac{z - 1.00}{0.10} = \frac{0.0109585}{0.0375} \approx 0.292227$$ $$z = 1.00 + 0.10 \times 0.292227 = 1.02922 \implies z^2 = (1.02922)^2 \approx 1.05930$$

3. Time of Carburization:

$$x^2 = (6.0 \times 10^{-4}\text{ m})^2 = 3.60 \times 10^{-7}\text{ m}^2$$ $$4 \cdot z^2 \cdot D = 4 \times 1.05930 \times (1.28 \times 10^{-11}\text{ m}^2/\text{s}) = 5.4236 \times 10^{-11}\text{ m}^2/\text{s}$$ $$t = \frac{3.60 \times 10^{-7}\text{ m}^2}{5.4236 \times 10^{-11}\text{ m}^2/\text{s}} \approx \mathbf{6638\text{ s}} = \mathbf{1.844\text{ h}}$$

Discrepancy with the official solution. The official key gives $t = 6636\text{ s}$. Linear interpolation in the table gives $z = 1.0292$ and $t = 6637.6\text{ s} \approx 6638\text{ s}$ (the exact inverse error function, $z = 1.0271$, would give $6665\text{ s}$ because the table is linear between $1.00$ and $1.10$). The key is $0.02\%$ below the interpolated value; this is a rounding difference, and the interpolated value is reported.

Phase 4 · Physical & Engineering Verification

Dimensional Check: $[t] = \frac{\text{m}^2}{\text{m}^2/\text{s}} = \text{s}$. Physical Insight: About $1.84\text{ hours}$ at $927^\circ\text{C}$ bring the carbon content at $0.6\text{ mm}$ to $0.30\text{ wt}\%$. Carbon is small, so it diffuses interstitially [Slide 13]; in the surface layer it blocks the movement of dislocations and hardens the steel for wear resistance, while the core stays tough, and the excess carbon leaves residual compressive stresses [Slide 30].

Problem 2 Problems T3_Diffusion.pdf #2 Arrhenius · Semiconductor Doping
Click to Collapse ▲

Diffusion of Aluminum in Monocrystalline Silicon

Original statement · Problems T3_Diffusion.pdf
2.- $\text{Al}$ can diffuse in a $\text{Si}$ monocrystal. Calculate the temperature at which the diffusion coefficient will have a value of $10^{-14}\text{ m}^2/\text{s}$? Data: $E_D = 73\text{ kcal/mol}$; $D_0 = 1.55 \times 10^{-4}\text{ m}^2/\text{s}$ and $R = 1.987\text{ cal/mol}\cdot\text{K}$.
Official Solution: T = 1566 K (1293 ºC)
Phase 1 · Hypotheses & Parameters
  • Volume Diffusion in a Single Crystal: A single crystal has no grain boundaries, so diffusion takes place through the volume, the slowest path ($D_{surface} > D_{grain\ boundary} > D_{volume}$) [Slide 25].
  • Arrhenius Behavior: The temperature dependence of $D$ obeys Arrhenius kinetics with constant $D_0$ and $E_D$ [Slide 26].
  • Parameters: $D = 10^{-14}\text{ m}^2/\text{s}$, $D_0 = 1.55 \times 10^{-4}\text{ m}^2/\text{s}$, $E_D = 73\,000\text{ cal/mol}$, $R = 1.987\text{ cal/mol}\cdot\text{K}$.
Phase 2 · Formulation & Pedagogical Strategy

Starting from the Arrhenius equation [Session 5 Slide 26]:

$$D = D_0 \exp\left(-\frac{E_D}{RT}\right) \implies \ln\left(\frac{D_0}{D}\right) = \frac{E_D}{RT}$$

Isolating absolute temperature $T$:

$$T = \frac{E_D}{R \cdot \ln(D_0 / D)}$$
Phase 3 · Step-by-Step Analytical Derivation

1. Diffusivity Ratio:

$$\frac{D_0}{D} = \frac{1.55 \times 10^{-4}\text{ m}^2/\text{s}}{1.0 \times 10^{-14}\text{ m}^2/\text{s}} = 1.55 \times 10^{10}$$

2. Natural Logarithm:

$$\ln(1.55 \times 10^{10}) = \ln(1.55) + 10 \cdot \ln(10) = 0.438255 + 23.025851 = 23.464106$$

3. Absolute Temperature Calculation:

$$T = \frac{73\,000\text{ cal/mol}}{(1.987\text{ cal/mol}\cdot\text{K}) \times (23.464106)} = \frac{73\,000}{46.62318} \approx \mathbf{1565.74\text{ K}} \approx \mathbf{1566\text{ K}}$$

Conversion to Celsius:

$$T = 1565.74 - 273.15 = \mathbf{1292.59^\circ\text{C}} \approx \mathbf{1293^\circ\text{C}}$$
Phase 4 · Physical & Engineering Verification

Dimensional Check: $[T] = \frac{\text{cal/mol}}{(\text{cal/mol}\cdot\text{K})} = \text{K}$. Physical Insight: A diffusivity of $10^{-14}\text{ m}^2/\text{s}$ needs $1293^\circ\text{C}$: $D$ depends exponentially on $T$, and the high activation energy ($73\text{ kcal/mol} \approx 305\text{ kJ/mol}$) means the atoms need a lot of thermal energy to jump [Slides 4, 26]. Diffusion of impurities in Si wafers is the process used to fabricate integrated circuits [Slide 29].

Problem 3 Problems T3_Diffusion.pdf #3 Two-Point Arrhenius · Activation Energy
Click to Collapse ▲

Activation Energy and Diffusivity of Carbon in Mild Steel

Original statement · Problems T3_Diffusion.pdf
3.- The diffusivity of carbon in mild steel was measured at two different temperatures:
Data: $R = 8.314\text{ J/mol}\cdot\text{K}$
• At $T_1 = 850^\circ\text{C}$: $D_1 = 4.826 \times 10^{-12}\text{ m}^2/\text{s}$
• At $T_2 = 950^\circ\text{C}$: $D_2 = 1.805 \times 10^{-11}\text{ m}^2/\text{s}$
Using these data, calculate:
a) The activation energy for the $\text{C}$ diffusion in mild steel, for the temperature interval of $850^\circ\text{C}$ to $950^\circ\text{C}$ (Solution: $E_D = 36\text{ kcal/mol}$)
b) The diffusivity at $1000^\circ\text{C}$, assuming that the activation energy does not change at this temperature range. (Solution: $D = 3.23 \times 10^{-11}\text{ m}^2/\text{s}$)
Official Solution: ED = 36 kcal/mol; D(1000 ºC) = 3.23 x 10^-11 m^2/s
Phase 1 · Hypotheses & Parameters
  • Single Arrhenius Law (assumption): The problem uses one Arrhenius law with constant $D_0$ and $E_D$ for $\text{C}$ in mild steel from $850^\circ\text{C}$ to $1000^\circ\text{C}$, as part b) states [Session 5 Slide 26].
  • Parameters: $T_1 = 850^\circ\text{C} = 1123.15\text{ K}$, $D_1 = 4.826 \times 10^{-12}\text{ m}^2/\text{s}$ $T_2 = 950^\circ\text{C} = 1223.15\text{ K}$, $D_2 = 1.805 \times 10^{-11}\text{ m}^2/\text{s}$ $T_3 = 1000^\circ\text{C} = 1273.15\text{ K}$, $R = 8.314\text{ J/mol}\cdot\text{K}$.
Phase 2 · Formulation & Pedagogical Strategy

Dividing Arrhenius equations at two temperatures eliminates $D_0$ [Session 5 Slide 26]:

$$\ln\left(\frac{D_2}{D_1}\right) = \frac{E_D}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right) \implies E_D = \frac{R \cdot \ln(D_2 / D_1)}{\frac{1}{T_1} - \frac{1}{T_2}}$$

For part (b), extrapolating to $T_3 = 1000^\circ\text{C}$:

$$D_3 = D_2 \cdot \exp\left[\frac{E_D}{R}\left(\frac{1}{T_2} - \frac{1}{T_3}\right)\right]$$
Phase 3 · Step-by-Step Analytical Derivation

Part (a): Activation Energy $E_D$

$$\frac{D_2}{D_1} = \frac{1.805 \times 10^{-11}}{4.826 \times 10^{-12}} = 3.7401575 \implies \ln(3.7401575) \approx 1.319128$$ $$\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{1123.15} - \frac{1}{1223.15} = 8.903530 \times 10^{-4} - 8.175612 \times 10^{-4} = 7.27918 \times 10^{-5}\text{ K}^{-1}$$ $$E_D = \frac{8.314 \times 1.319128}{7.27918 \times 10^{-5}} = 150\,666\text{ J/mol} = 150.67\text{ kJ/mol}$$ $$E_D = \frac{150\,666\text{ J/mol}}{4184\text{ J/kcal}} \approx \mathbf{36.01\text{ kcal/mol}} \approx \mathbf{36\text{ kcal/mol}}$$

Part (b): Diffusivity at $1000^\circ\text{C}$ ($T_3 = 1273.15\text{ K}$)

$$\frac{1}{T_2} - \frac{1}{T_3} = \frac{1}{1223.15} - \frac{1}{1273.15} = 8.175612 \times 10^{-4} - 7.854534 \times 10^{-4} = 3.21078 \times 10^{-5}\text{ K}^{-1}$$ $$\text{Exponent} = \frac{150\,666}{8.314} \times (3.21078 \times 10^{-5}) = 18121.96 \times 3.21078 \times 10^{-5} \approx 0.581857$$ $$D_3 = (1.805 \times 10^{-11}\text{ m}^2/\text{s}) \times e^{0.581857} = (1.805 \times 10^{-11}) \times 1.78936 \approx \mathbf{3.23 \times 10^{-11}\text{ m}^2/\text{s}}$$
Phase 4 · Physical & Engineering Verification

Consistency with Official Data: The official reference table [Session 5 Slide 23] lists $D(\text{C in Fe-FCC}) \approx 3 \times 10^{-11}\text{ m}^2/\text{s}$ at $1000^\circ\text{C}$, matching our derived $3.23 \times 10^{-11}\text{ m}^2/\text{s}$; both are of the same order, the slide value being a one-significant-figure figure ($\approx 8\%$ lower). Mechanism Check: $E_D \approx 36\text{ kcal/mol}$ is lower than the activation energy for self-diffusion of iron ($57.5\text{ kcal/mol} = 240\text{ kJ/mol}$ for $\alpha\text{-Fe}$) [Slide 9]. This agrees with carbon diffusing interstitially, which needs less energy than vacancy diffusion [Slide 13].

Problem 4 Problems T3_Diffusion.pdf #4 Fick's 1st Law · Ceramic Barrier Transport
Click to Collapse ▲

Ionic Transport of Nickel Through an MgO Ceramic Plate

Original statement · Problems T3_Diffusion.pdf
4.- A plate of magnesium oxide of $0.1\text{ cm}$ thickness separates two metallic blocks, one of $\text{Ni}$ and one of $\text{Ta}$. At $1400^\circ\text{C}$ $\text{Ni}$ ions diffuse through the $\text{MgO}$ plate. The diffusion coefficient of $\text{Ni}$ in $\text{MgO}$ is $9 \times 10^{-12}\text{ cm}^2/\text{s}$ and the lattice parameter of (fcc) $\text{Ni}$ at $1400^\circ\text{C}$ is $3.6 \times 10^{-8}\text{ cm}$. Determine the time necessary for sufficient ions $\text{Ni}^{2+}$ ions to pass through the ceramic material so that the thickness of the block of $\text{Ni}$ is reduced by one micron.
Official Solution: t = 309 h
Phase 1 · Hypotheses & Parameters
  • Quasi-Steady State: Because the plate thickness ($\Delta x = 0.1\text{ cm} = 1000\ \mu\text{m}$) is much larger than the layer consumed ($\Delta h = 1\ \mu\text{m}$), flux through $\text{MgO}$ is in steady state [Slide 16].
  • Interfacial Boundary Conditions: At the $\text{Ni}/\text{MgO}$ interface, the concentration equals the atomic density of nickel metal: $C_1 = \rho_{\text{at, Ni}} = 4/a^3$ (FCC, as the statement gives). At the $\text{MgO}/\text{Ta}$ interface, the nickel that arrives is taken as removed at once: $C_2 \approx 0$ (assumption of the model).
  • Parameters: $\Delta x = 0.1\text{ cm}$, $D = 9 \times 10^{-12}\text{ cm}^2/\text{s}$, $a = 3.6 \times 10^{-8}\text{ cm}$, $\Delta h = 1\ \mu\text{m} = 10^{-4}\text{ cm}$.
Phase 2 · Formulation & Pedagogical Strategy

1. Atoms of $\text{Ni}$ removed per unit area: $N/A = \rho_{\text{at, Ni}} \cdot \Delta h = \frac{4 \cdot \Delta h}{a^3}$.
2. Steady-state flux via Fick's First Law [Session 5 Slide 16]:

$$J = D \frac{\Delta C}{\Delta x} = D \frac{\rho_{\text{at, Ni}}}{\Delta x}$$

3. Conservation of mass equates flux to removal rate:

$$J = \frac{N/A}{t} \implies \frac{\rho_{\text{at, Ni}} \cdot \Delta h}{t} = D \frac{\rho_{\text{at, Ni}}}{\Delta x} \implies t = \frac{\Delta x \cdot \Delta h}{D}$$

The atomic density $\rho_{\text{at, Ni}}$ elegantly cancels out.

Phase 3 · Step-by-Step Analytical Derivation

1. Direct Evaluation with General Formula:

$$\Delta x = 0.1\text{ cm}, \quad \Delta h = 10^{-4}\text{ cm}, \quad D = 9 \times 10^{-12}\text{ cm}^2/\text{s}$$ $$t = \frac{(0.1\text{ cm}) \times (10^{-4}\text{ cm})}{9 \times 10^{-12}\text{ cm}^2/\text{s}} = \frac{10^{-5}\text{ cm}^2}{9 \times 10^{-12}\text{ cm}^2/\text{s}} = \frac{1}{9} \times 10^7\text{ s} \approx 1.1111 \times 10^6\text{ s}$$

2. Conversion to Hours:

$$t = \frac{1.1111 \times 10^6\text{ s}}{3600\text{ s/h}} \approx \mathbf{308.64\text{ h}} \approx \mathbf{309\text{ h}}$$

3. Step-by-Step Atomic Confirmation:

$$\rho_{\text{at, Ni}} = \frac{4}{(3.6 \times 10^{-8}\text{ cm})^3} = 8.5734 \times 10^{22}\text{ atoms/cm}^3$$ $$N/A = (8.5734 \times 10^{22}) \times (10^{-4}) = 8.5734 \times 10^{18}\text{ atoms/cm}^2$$ $$J = (9 \times 10^{-12}) \times \frac{8.5734 \times 10^{22}}{0.1} = 7.71605 \times 10^{12}\text{ atoms/cm}^2\cdot\text{s}$$ $$t = \frac{8.5734 \times 10^{18}}{7.71605 \times 10^{12}} = 1.1111 \times 10^6\text{ s} \approx \mathbf{309\text{ h}}$$
Phase 4 · Physical & Engineering Verification

Dimensional Check: $[t] = \frac{\text{cm} \cdot \text{cm}}{\text{cm}^2/\text{s}} = \text{s}$. Physical Insight: Nearly 13 days ($309\text{ hours}$) at $1400^\circ\text{C}$ are needed to remove $1\ \mu\text{m}$ of nickel: diffusion is slower for charged species, in compact structures and in materials with high $T_m$ [Slide 27]. At fixed concentrations the flux falls as $1/\Delta x$, so a thicker plate would take proportionally longer [Slide 16].

Problem 5 Problems T3_Diffusion.pdf #5 Fick's 2nd Law + Arrhenius Coupled
Click to Collapse ▲

Cementation Temperature for Steel 1010 in 8 Hours

Original statement · Problems T3_Diffusion.pdf
5.- A 1010 steel, that contains $0.10\text{ wt}\%\text{ C}$ is subjected to cementation process, in order to obtain effective $\text{C}$ composition of $0.30\text{ wt}\%$ at a depth of $1.16\text{ mm}$ below the surface. Assume that the maximum $\text{C}$ solubility in the steel surface is reached at moment that the carburizing process is initiated, generating a $\text{C}$ concentration at the surface of $1.31\text{ wt}\%$. Determine the required cementation temperature for the process to be successfully carried out within an 8 hour time span.
Data: $D_0 (\text{C in Fe}) = 16.2\text{ mm}^2/\text{s}$; $E_D = 137\,800\text{ J/mol}$; $R = 8.314\text{ J/mol}\cdot\text{K}$.
Official Solution: T = 1175 K = 902 ºC
Phase 1 · Hypotheses & Parameters
  • Coupled Transient Diffusion: Combines semi-infinite error function diffusion with Arrhenius thermal kinetics [Session 5 Slides 20, 26].
  • Parameters: $C_0 = 0.10\text{ wt}\%$, $C_s = 1.31\text{ wt}\%$, $C_x = 0.30\text{ wt}\%$ $x = 1.16\text{ mm} = 1.16 \times 10^{-3}\text{ m}$ $t = 8\text{ h} = 8 \times 3600\text{ s} = 28\,800\text{ s}$ $D_0 = 16.2\text{ mm}^2/\text{s} = 16.2 \times 10^{-6}\text{ m}^2/\text{s}$ $E_D = 137\,800\text{ J/mol}$, $R = 8.314\text{ J/mol}\cdot\text{K}$.
Phase 2 · Formulation & Pedagogical Strategy

1. Evaluate the concentration ratio $\text{erf}(z) = \frac{C_s - C_x}{C_s - C_0}$.
2. Determine $z$ via linear interpolation in the official table [Slide 21].
3. Calculate the required diffusivity: $D = \frac{x^2}{4 \cdot z^2 \cdot t}$.
4. Invert the Arrhenius equation to calculate the processing temperature $T$:

$$T = \frac{-E_D}{R \cdot \ln(D / D_0)}$$
Phase 3 · Step-by-Step Analytical Derivation

1. Error Function Value:

$$\text{erf}(z) = \frac{1.31 - 0.30}{1.31 - 0.10} = \frac{1.01}{1.21} \approx 0.83471074$$

2. Linear Interpolation in Error Function Table [Slide 21]:

  • For $z_1 = 0.95 \implies \text{erf}(z_1) = 0.8209$
  • For $z_2 = 1.00 \implies \text{erf}(z_2) = 0.8427$
$$\frac{z - 0.95}{1.00 - 0.95} = \frac{0.83471074 - 0.8209}{0.8427 - 0.8209} \implies \frac{z - 0.95}{0.05} = \frac{0.01381074}{0.0218} \approx 0.633520$$ $$z = 0.95 + 0.05 \times 0.633520 = 0.981676 \implies z^2 = (0.981676)^2 \approx 0.963688$$

3. Diffusivity Calculation:

$$x^2 = (1.16 \times 10^{-3}\text{ m})^2 = 1.3456 \times 10^{-6}\text{ m}^2$$ $$4 \cdot z^2 \cdot t = 4 \times 0.963688 \times 28\,800\text{ s} = 111\,016.86\text{ s}$$ $$D = \frac{1.3456 \times 10^{-6}\text{ m}^2}{111\,016.86\text{ s}} \approx \mathbf{1.21207 \times 10^{-11}\text{ m}^2/\text{s}}$$

4. Inverting Arrhenius for Temperature $T$:

$$\frac{D}{D_0} = \frac{1.21207 \times 10^{-11}\text{ m}^2/\text{s}}{16.2 \times 10^{-6}\text{ m}^2/\text{s}} = 7.48191 \times 10^{-7} \implies \ln\left(\frac{D}{D_0}\right) = \ln(7.48191 \times 10^{-7}) = 2.01249 - 16.11810 = -14.10561$$ $$T = \frac{-137\,800\text{ J/mol}}{(8.314\text{ J/mol}\cdot\text{K}) \times (-14.10561)} = \frac{137\,800}{(8.314)(14.10561)} = \frac{137\,800}{117.275} \approx \mathbf{1175.02\text{ K}} \approx \mathbf{1175\text{ K}}$$ $$T = 1175.02 - 273.15 = \mathbf{901.87^\circ\text{C}} \approx \mathbf{902^\circ\text{C}}$$
Phase 4 · Physical & Engineering Verification

Sensitivity to Temperature: To reach $0.30\text{ wt}\%$ at $1.16\text{ mm}$ in $8\text{ h}$ the steel must be carburized at $902^\circ\text{C}$. Because $D$ grows exponentially with $T$, a lower temperature would need a much longer time and a higher one a shorter time [Slide 26].

Problem 6 Problems T3_Diffusion.pdf #6 Fick's 1st Law · Membrane Purification
Click to Collapse ▲

Hydrogen Purification Through a Palladium Membrane

Original statement · Problems T3_Diffusion.pdf
6.- Determine the thickness of a plate of $\text{Pd}$ with transversal area of $0.2\text{ m}^2$ so that it can purify $1.73 \times 10^{-3}\text{ kg/h}$ of hydrogen, if the hydrogen concentration at the side of high pressure of the plate is $1.5\text{ kg/m}^3$ and at the side of low pressure is $0.3\text{ kg/m}^3$. The diffusion coefficient of hydrogen in $\text{Pd}$ is $1 \times 10^{-8}\text{ m}^2/\text{s}$.
Official Solution: Δx = 5 mm
Phase 1 · Hypotheses & Parameters
  • Pure Steady State: Constant external pressures create time-invariant boundary concentrations $C_{\text{high}}$ and $C_{\text{low}}$ [Session 5 Slide 35].
  • Parameters: $A = 0.2\text{ m}^2$, $\dot{m} = 1.73 \times 10^{-3}\text{ kg/h}$ $C_1 = 1.5\text{ kg/m}^3$, $C_2 = 0.3\text{ kg/m}^3$ $D = 1.0 \times 10^{-8}\text{ m}^2/\text{s}$.
Phase 2 · Formulation & Pedagogical Strategy

1. Compute mass flux density [Session 5 Slide 15]:

$$J = \frac{\dot{m}}{A} \quad \left[\frac{\text{kg}}{\text{m}^2\cdot\text{s}}\right]$$

2. Apply Fick's First Law across the flat membrane [Slide 16, 35]:

$$J = D \frac{\Delta C}{\Delta x} \implies \Delta x = \frac{D \cdot (C_1 - C_2)}{J}$$
Phase 3 · Step-by-Step Analytical Derivation

1. Flux Density ($J$):

$$\frac{\dot{m}}{A} = \frac{1.73 \times 10^{-3}\text{ kg/h}}{0.2\text{ m}^2} = 8.65 \times 10^{-3}\text{ kg/m}^2\cdot\text{h}$$ $$J = \frac{8.65 \times 10^{-3}\text{ kg/m}^2\cdot\text{h}}{3600\text{ s/h}} \approx \mathbf{2.4028 \times 10^{-6}\text{ kg/m}^2\cdot\text{s}}$$

The worked solution stored in the text layer of Official Slide 35 gives $J = 8.65 \times 10^{-3}\text{ kg/m}^2\cdot\text{h} = 2.4 \times 10^{-6}\text{ kg/m}^2\cdot\text{s}$ and $\Delta x = 5\text{ mm}$ (the answer box on the rendered slide appears empty).

2. Concentration Difference:

$$\Delta C = C_1 - C_2 = 1.5\text{ kg/m}^3 - 0.3\text{ kg/m}^3 = 1.2\text{ kg/m}^3$$

3. Membrane Thickness ($\Delta x$):

$$\Delta x = \frac{(1.0 \times 10^{-8}\text{ m}^2/\text{s}) \times (1.2\text{ kg/m}^3)}{2.4028 \times 10^{-6}\text{ kg/m}^2\cdot\text{s}} \approx 4.994 \times 10^{-3}\text{ m} \approx \mathbf{5.0 \times 10^{-3}\text{ m}} = \mathbf{5\text{ mm}}$$
Phase 4 · Physical & Engineering Verification

Dimensional Check: $[\Delta x] = \frac{(\text{m}^2/\text{s}) \cdot (\text{kg/m}^3)}{\text{kg}/(\text{m}^2\cdot\text{s})} = \text{m}$. Physical Insight: At fixed concentrations the flux scales as $J \propto 1/\Delta x$ [Slide 16], so $5\text{ mm}$ is the thickness at which steady-state permeation equals the required purified flow. Hydrogen is small with respect to the matrix, so it diffuses interstitially, which is faster [Slide 13]; its diffusivity ($10^{-8}\text{ m}^2/\text{s}$) is far above the values of the diffusivity table [Slide 23]. This is the example of $\text{H}_2$ purification through a $\text{Pd}$ layer [Slide 35].